iFlight Mach R5 Analog 6S w / RaceCam R1 Micro Camera Frsky R81

42,801円(税込)

購入数

受信機
Frsky R81

PRODUCT DESCRIPTION
In response to our customer needs, this is our answer for all the racers in out there: The iFlight Mach R5 BNF!
Equipped with XING2 2506 motors for more torque and efficiency as well as high speed and consistent lap times.
Quick-swap arm assembly for easy repair on your flying spot or race day.
Enhanced canopy design with low wind resistance for maximum speed and efficiency.

Two versions available:

HD version: Caddx Vista Nabula nano
Analog version: SucceX mini Force 600mW with RaceCam R1 Micro
FEATURES:

Super durable design, 6mm arms and 7075 CNC middle plate
Super lightweight but superpower with our newest XING2 2506 motors


HIGHLIGHTS:

XING2 2506 1850KV motors
SucceX-D Mini F7 TwinG
SucceX Mini 55A
SucceX Mini Force 5.8GHz 600mW VTX Adjustable


Tips:




VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.




PRE-TUNED & PRE-SETUP:

-Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

-To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

-Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

-Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

-GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.

-Please check our linked article on "GPS Rescue Mode // Setup"



Changelog:

August 2021: RaceCam R1 Micro 1200TVL 1.8mm 14*14 changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19



FRAME // :Mach R5

-Wheelbase: 215mm

-Main body dimension: 152*152mm

-Arm thickness: 6mm

-Bottom plate thickness: 3mm

-Top plate thickness: 2.5mm

-Middle Plate thickness: 2.5mm CNC 7075 aluminum alloy

-TPU Camera plate

-FC: 30.5*30.5/25.5*25.5mm/20*20mm

-FPV Cam: 14mm /19mm Micro / 20mm



FC // SucceX-D Mini F7 2-6S TwinG

Specification:

MCU: STM32 F722
Gyro: MPU6000
Blackbox: 32MB
BEC output: 5V 2.5A/9V 2.5
Barometer: NO
Connector: Micro-USB
OSD: IFLIGHT OSD (AT7456E)
FC Firmware:IFLIGHT_F722_TWING
Mounting pattern: 20.5*20.5mm φ4mm
Dimensions: 29*29mm
Weight: 5.6g


ESC // SucceX Mini 55A 2-6S ESC

Specification:

Dimension: 31*29.5mm
Mounting Holes: 20*20/φ4mm
Input: 2-6S
Weight:10.8g
Constant: 55A / Burst: 60A
BLHeli: BLHeli 32
Telemetry: No
Current sensor: Yes
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Target: iFlight-G071-4IN1


VTX // SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Specification:


Power: PIT/25/200/400mW/600mW
Antenna interface: MMCX
VTX protocol : IRC Tramp
Output 40 channels
Size: 29*29mm
Mounting pattern: 20*20Φ3/25*25 mmΦ2
Weight: 4g



Mach R5 Analog Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter
1x Mach R5 Frame
1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
1x Sigma RHCP Ipex/UFL 5.8g antenna
2sets x Nazgul R5 3-blades (Set of 4 - Color may vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)