NewBeeDrone BeeBrain BLV3 AIO Flight Controller

12,800円(税込)

購入数

【NewBeeDrone BeeBrain BLV3 AIO Flight Controller】

The BeeBrain BLV3 Flight Controller Flight Controller!
The latest iteration of the BeeBrainBL contains massive improvements to the performance of the built in FrSky Receiver and built in video transmitter.

In addition, the MOSFETs were upgraded to support the power demands of micro toothpick drones.

The solder pads on each ESC were enlarged to enable custom builds! With plenty of surface area and spacing, you can now solder on any motor of your choosing. One of our favorite applications of the BeeBrain BL is in micro drones. Since the BeeBrain BL integrates the flight controller, ESCs, receiver, and video transmitter all in one package, it's insanely easy and clean to build.

【レシーバーの大幅な改善-50%広い範囲】
・Optimized SPI Receiver hardware to improve efficiency within the receiver.
・Removable antennas.A
・additional low noise amplifier to increase range.
・Optional wiring harness is included to install an external receiver (Crossfire, Ghost, etc)

【ビデオ送信機の改善-120mW】
New heatsink and layout to increase heat dispersion and efficiency.
Transmitting power increased to 120mW from 25mW (V2)

【仕様】
STM32F411 MCU
ESCファームウェア:Ships with JESC 48 KHz. BLHeli_s capable.
ESC仕様: 4 channel 12A ESC
重量:6 grams (including antennas and battery connector)
サイズ:Outer dimensions 29 x 29 x 7.6 mm
穴:25.5 x 25.5 mm
バッテリー入力: 1 – 2 S
外部レシーバー用のUART2TXおよびRXフリー(非反転SBus信号のみ)

注意:デフォルトの電力モードは低(5mW)です。飛行する前に、電力レベルを中(50mW)に設定します。

【パッケージ内容】
1 x BeeBrain BL V3 Flight Controller
4 x Grommet
4 x Screw
1 x JST 0.8 Wire for External Receiver
2 x Receiver Antennas
1 x VTX Antenna